Fitting a towbar to the Toyota Previa

This is a two part videoserie I've made documenting how to fit a towbar to a Toyota Previa / Tarago / Estima.

Hope you find it useful. :-)

The brand I used: GDW a complete kit.

Part 1


Part 2

The towbar has just been unpacked and trying it out.

Insert Points of towbar.

Close up, not to much rust.

Had to remove the plastic bumper and the framepart to fit the new nowbar "inside".

The bolts were pretty rusty, so had a work removing them and welding new nuts.

.

Installing a Trailer Hitch, tow bar on a Toyota Previa from 1998

This post is about mounting a Trailer Hitch on a Toyota Previa from 1998.

The Brand of towbar I choosed: G.D.W made in Belgium
GDW = I'm pleased with the quality, it was in my opinion the smartest construction.

I've made a 2 part video showing the removal of bumper and the installation process... and all the problems along the way. Hope you find it of interest. :-)


Towing capacity for this tow bar: 1600 kg which is also maximum cargo for hitch installed in Toyota Previa..
Max vertical load on hitch: 75 kg.

First removing the rear bumper, plenty of rust dissolver fluid used around the bolts and nuts.


The ends of the hitch is attached to the car frame with carriage bolts and blocks of steel with round holes. ... Bumber goes outside the hitch.

No mods were necessary except drilling one hole on the buffer metal frame that the plastic bumper sits on.

Biggest problem was rusty bolts, some were very hard stuck and I pulled some apart (read broke them)
Clean rusty parts, screwdriver and a wire brush.
Rust protection used: boiled linseed oil

Part 1:


Installing a Trailer Hitch, a towbar on a minivan, part 2