Previa swivel seat

Look at this converted Previa with four swivelseats. Cred goes to Sean Green who also took the photo.

Captain chairs, seats

Picture from: http://guineapigturd.blogspot.se/2013/01/the-sexiest-minivans-ever-made-includes.html

Previa swivel chair, Picture from: http://www.talbotoc.com/just-been-and-collected-t10061.html

Toyota Previa Camper Van Conversion for sale

Toyota Previa Camper Van Conversion

Looks like the owner has turned the passenger front seat. In better words; reversing passenger seat. Wonder how it was done? Anybody know? I guess you cant just turn it around and bult it there?


Ad: https://asheville.craigslist.org/rvs/d/toyota-previa-camper-van/6404640596.html

"Pictures speak to this Beautiful wine colored Previa van that I converted into a self contained off grid camper. However, because of illness will not be able to travel. I have invested more than the asking price with complete mechanical work and conversion. Too much to list in this ad. Details available upon contacting me. Partial list includes all new: tires, plug and play 100 watt solar suitcase with 100 amp/hr solar deep cycle battery, roof tarp/shade rack, 7x20 tarp, 14 gal. fresh water storage, kitchen chuck box, bed with custom mattress, storage bins, stove, screens for sunroofs, reclining passenger seat, and much more. This van is in excellent condition and drives wonderfully! These vans will run 300,000 or more miles with proper maintenance. Serious inquires ONLY! Thank you."

.

.

.

.

.

.

.

.

.

.

.	Just turned the captain chair or is it a swivel chair? .

Would love this in my van. Do anyone know how to do this? .

.

Swivel seats in a Toyota Previa, Estima, Tarago?

Swivel seats in a Toyota Previa, Estima, Tarago?

Yes it can be done!

Check out this link, if you sign up you can download the pdf:s

http://www.teoc.ws/community/topic/54359-swivel-front-seats-camper-conversion/



Simon Baldwin

“It uses an after market pull tested swivel plate and the Original hing mechanism so the seat tilts back as normal for engine acees. It has raised the seat hight by about 20mm

Bit of welding required to produce a seat frame to sit on but no mods to the car and in theory could be bolted back as original - installation passed Mot and engineer ionspection - probably cost me about £100”
” No i didnt use the midlde seat mechanism they are too high - I booght an after market swivel base that was only about 30mm high.”
“Steel work was made from 3mm thick 25mm angle - Tacked with a mig and then welded properly with a Arc welder”