Monday, April 3, 2017

Windshield wiper replacement, Toyota Previa using Bosch

Stan Buckalew has found a windshield wiper replacement for the Previa:

"Finally got a windshield wiper replacement. Just bought the brand shown and changed blades. There's one end to unclamp by squeezing the rubber into the clamp and then sliding it out. Slides into frame same way"

Thanks Stan! Might come in handy when it's time to change ! :-)

Pictures from Stan:


------------------  ---------------
Another solution from Micah Foti:
" I just drilled out the rivets holding the old wiper blades on and put new ones on with bolts"

Picture showing bolt and nut, from Micah Foti. Thanks for the tip!



 
Micah Foti  "I just removed my old wipers from the arms (they're riveted on), drilled out the small hole to match the size of the big hole, then you can just use a bolt/nut and install any wiper blade you buy anywhere."
 
 
 
 
 Somebody has used standard 26" and slide in the new ones.

 

Photo: Parker Kropenick

"I got these off of eBay I believe. Pretty sure the blades are the oem ones. They are just inserts that snap on the little clips. My van is a 91 btw. If you can't see because of the glare it says "W-28R" made by anco." - Parker Kropenick

1 comment:

  1. thanks.. just purchased ANCO W-28R on Amazon... reviews on Amazon indicates that these wiper refills will work on 1992 Previa front windshield...

    ReplyDelete